 |
|
| Home > Products > AdvantEDGE Free Chlorine Panel |
 |
 Measurement Electrodes |
Free Chlorine Panel System Specifications |
This free chlorine sensor system will measure accurately in processes that are between 4 and 9 pH. When used with a LD500 local display unit and a pH measurement system, measured hypochlorous acid (HOCl) and hypochlorite ion (OCl¯) concentration can be used to determine free chlorine present.
|
• Amperometric measurement
• Temperature Compensation
• Optional automatic pH compensation
• Pre-Calibrated
• True plug and play
• Rugged Teflon membrane
• Replaceable membrane cap
• Optional remote measurement, calibration, configuration, and diagnosis
• Turnkey monitoring system |
Measurement System Performance
Ranges: 0 to 5ppm and 0 to 20 ppm
Resolution: 0.005 ppm
Accuracy: 2% or +/- 10 ppb (whichever is greater)
Step Responce Time: 90% in 90 seconds |
Units of Measure
Measurement Units: ppm, free chlorine
Temperature Units: C, F |
Operational Environment
Temperature Range: 0 °C to 45 °C (32 °F to 113 °F)
Maxium Pressure: 15 psi @ 45 °C
System Flow in Chamber: 200 to 250 mL/min |
Calibration
Sample: 1 point
Zero: 1 point
Note: Precalibrated at the factory |
Power Requirements
Voltage Range: 10 to 30 VDC; 100-240 VAC optional
Maximum Power: 200 mW
Typical Power: 120 mW
Note: Class ll DC power supply required
|
Other Configuration Options
Sensor Filter: 0 to 100 seconds
Temperature Filter: 0 to 100 seconds |
Free Chlorine Operation
When chlorine and pH systems are connected to the LD500 local display, HOCl and CIO dissociation curves are pH compensated and used to calculate free chlorine present. A stable pH value can also be entered manually. |
Approvals and Ratings Immunity and emissions:
CE Certified 89/336/EEC:CISPER 11, EN61000 (-4-2,-4-3,-4-4,-4-6,4-8)
Safety: CuLus Listed; 367G E303570
Hazardous Locations:Haz Loc Class 1, Division 2, Groups A, B, C, D, Max Ambient 50 °C |
Construction
Process Electrodes: gold cathode, silver anode
Membrane: Teflon®
O-Rings: Viton
Sensor Head Material: Norel®
Interface module material: Peek or CPVC
Weight: 1.2 lbs.
|
|
| |
|
|
| Follow the links below for more information on other parameters available |
|
|
|
|
|
|
|
|
|
| |
|
|
|
| AdvantEDGE Ordering Guide |
|
| |
|
|
|
| |
For more information or to place an order please contact our customer service department or call 888-203-7248 |
|
| |
