 |
|
| Home > Products > AdvantEDGE Dissolved Oxygen |
 |
 Measurement Electrodes |
Dissolved Oxygen System Specifications |
Connect this Dissolved Oxygen sensor to a PLC for
seamless integration with industrial control
systems. Use any computer to display data,
calibrate and customize the measurement
without an intermediate analyzer electronics
box. A LD500 local display can be used if desired. Sensor heads are pre-calibrated and can be replaced or exchanged with any other type of sensor without taking the system down.
Save space, time and money.
|
• Clark Cell technology
• Pre-calibrated (no field calibration required)
• Plug & play sensor heads
• Rugged, foul resistant membrane
• Electrode protection options
• Simple membrane cartridge replacement
• Direct data reporting
• Plug & play industrial communications adapters
|
Measurement System Performance
Range: 0 to 40 ppm
Resolution: 0.01 ppm
Accuracy: 0.04 ppm
Step Response Time: 90% in 90 seconds
Note: Typical at 25°C
Performance unaffected by cable length |
Units of Measure
Measurement Units: ppm, mg/l, %
Temperature Units: °C, °F |
Operational Environment
PEEK® Sensor Head
Temperature Range: -5°C to 50°C
Maximum Pressure: 150 psi @ 50°C
Maximum Flow Rate: 10 ft/second |
Calibration
Air: Automatically adjusts for set pressure
Sample: 1 point
Zero: 1 point
Temperature: 1 and 2 point
Note: D.O. and temperature are precalibrated at the
factory |
Power Requirements
Voltage Range: 10 to 30 VDC
Maximum Power: 200 mW
Typical Power: 120 mW
Note: Class II DC power supply required |
Approvals and Ratings Immunity & Emissions: CE (EN61326 and
EN61326:1998)
Safety: CE (EN 61010-1) UL 508
Hazardous Locations: UL Class I, Division 2 |
Construction
Process Electrodes: Gold Cathode, Silver Anode,
Silver Reference
(3 Electrode Polarographic Clark Cell)
Membrane: FEP Teflon
O-Rings: Viton® (other materials available)
Sensor Head Material: PEEK® |
Other Configuration Options
Sensor Filter: 0 to 100 seconds
Temperature Filter: 0 to 100 seconds
|
| |
|
|
| Follow the links below for more information on other parameters available |
|
|
|
|
|
|
|
|
|
|
|
|
|
| AdvantEDGE Ordering Guide |
|
|
|
|
|
|
|
| |
For more information or to place an order please contact our customer service department or call 888-203-7248 |
|
| |
