 |
|
| Home > Products > AdvantEDGE High Range Turbidity |
 |
 Measurement Electrodes |
|
High Range Turbidity System Specifications
|
Connect this Raw Water Turbidity sensor
to a PLC for seamless integration with
industrial control systems. Use any computer
to display data, calibrate and customize the measurement without an intermediate
analyzer electronics box. A LD500 local display can be used if desired. Sensor has a second measurement mode to report sediment load. It does this using a spectral measurement to compensate for particle color, size and shape.
|
• 0 to 4000 NTU measurement range
• Conforms to ISO 7027
• 90 degree and 180 degree light paths
• Rugged, foul resistant construction
• Local and Remote configuration and
diagnostics
• Temperature measurement included
• Direct data reporting
• Plug & play industrial communications
adapters
|
Measurement System Performance
Range: 0 TO 4000 NTU
Resolution: 0.1 NTU
Accuracy: 0.2 NTU
Step Responce Time: 90% in 15 seconds
Note: Typical at 25 C; Preformance
unaffected by cable length. |
Units of Measure
Measurement Units:
Turbidity Mode: NTU
Sediment mode: mg/l %
Temperature Units: C, F |
Operational Environment
Temperature Range: -5 to 50 C
Maxium Pressure: 150 psi @ 50 C
Maxium Flow Rate: 10 ft./Sec. |
Calibration
Sample: 1 point
Zero: 1 point
Temperature: 1 and 2 point
Note: Turbidity and temperature are
precalibrated at the factory |
Power Requirements
Voltage Range: 10 to 30 VDC
Maximum Power: 200 mW
Typical Power: 120 mW
Note: Class II DC power supply required |
Other Configuration Options
Sensor Filter: 0 to 100 seconds
Temperature Filter: 0 to 100 seconds |
Measurement Modes
Turbidity: 90 degree/ 180 degree, narrow
beam, IR light
Sediment Load: Blue to IR spectrum detected
at 90 degrees and 180 degrees
Temperature: Automatic from -5 to 50 C |
Approvals and Ratings Immunity and Emissions: CE (EN61326 and
EN61326:1998)
Safety: CE ( EN 61010-1) UL 508
Hazardous Locations: UL Class 1, Division 2
Turbidity Measurements: ISO 7027 |
Construction
Windows: Quartz or Sapphire
Optical Topology: Multi-Color Source
O-Rings: Viton (other materials available)
Sensor Head Material: Polycarbonate
Weight: 1.2lbs |
|
| |
|
|
| Follow the links below for more information on other parameters available |
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
 |
|
|
| |
|
| |
