 |
|
| Home > Products > AdvantEDGE Local Display and Profibus Gateway Adapter |
 Measurement Electrodes |
|
|
LD500 Local Display |
Profibus Gateway Adapter |
Functions and Features
• Connects to any AdvantEDGE system.
• Convenient 1/4 DIN enclosure
• Display sensor and temperature data
• Menu Functions: Calibration, Configuration and Diagnostics
• Digital Protocol Options for remote measurement, calibrations,
configurations, and diagnostics.
• One 4 to 20 mA loop output (Standard)
• Two 4 to 20 mA loop outputs (Optional)
• Two form C relays for alarm, control, and wash (Optional)
• PID for pH
• 7 Conduit knockouts for easy cabling |
PA500 Profibus Gateway Adapter connects up to 30 Modbus Communications Modules to a Profibus DP (V0 or V1) network with M12 connector. Full-featured measurement, calibration, configuration and diagnostics.
24 VDC power. |
Mounting Options
• Conduit Box, NEMA 4X (Standard)
• 1/2 DIN NEMA 4X Panel Mount (Optional)
|
|
Interface
• Display: 2 line by 16 character LCD
• Backclight: high contrast green
• Keypad: 4 directional arrows, MENU, ESCAPE, and ENTER
|
|
Enviromental Conditions
• Ambient Operating Temperature Range: -20 to 65 C
• Maximum Relative Humidity: 95% non-condensing
• Meets CE requirements for heavy industrial use.
• Nema 4X housing. |
|
Supports 1 to 255 Modbus RTU AdvantEDGE sensors of any type.
• Supported Sensors:
pH, ORP, Two Electrode
Conductivity, Two electrode resistivity,
Toroidal Conductivity, Dissolved Oxygen,
Ozone, Turbidity, and Free Chlorine. |
|
4 to 20 mA Current Loop Options
• One Isolated Current Loop (Standard)
• Two Isolated Current Loops (Optional)
• Assignable Parameters
• PID function when pH parameter selected
• Loop power provided by LD500 |
|
Relays/Optional
• Two 1 Amp form C relays with NO and NC contacts.
• Assignable Parameters
• Configured for Alarm, Control, & Timer Functions |
|
Digital Communication Options to Host Computer Network
• MODBUS RTU
• Device Net
• Profibus DP/V1
• RS-232 ASCII
• RS-232 DF1
• RS485 ACSII
• CANOpen
• Others: Consult Factory |
|
Power Supply
Input: 10 to 30 VDC; 100 to 240 VAC optional
Power: 2W at 25 C |
|
| |
|
|
| Follow the links below for more information on parameters available |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
| |
For more information or to place an order please contact our customer service department or call 888-203-7248 |
|
| |
